China Custom Timing Belt Sprockets with Countersunk Holes chain sprocket price

Item Description

CZPT Machinery offers a broad selection of high good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. Standard and non-standard pulleys in accordance to drawings are offered.

 
Sorts of substance:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Forged Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other materials on desire, this kind of as cooper, bronze and plastic
 
Kinds of area remedy
 1.  Anodized floor -Aluminum Pulleys
 2.  Hard anodized floor — Aluminum Pulleys
 3.  Black Oxidized area — Steel Pulleys
 4. Zinc plated surface area — Steel Pulleys
 5. Chromate floor — Steel Pulleys Solid Iron Pulleys
 6. Nickel plated floor –Metal Pulleys Solid Iron Pulleys
 
Kinds of tooth profile

Enamel Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL one/5″(5.08MM)
L 3/8″(9.525MM)
H 1/2″(12.7MM)
XH seven/8″(22.225MM)
XXH 1 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Varieties of pitches and sizes

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt enamel variety from 16 to seventy two
two.  Pilot Bore XL037 for 9.53mm timing belt enamel number from 10 to seventy two
3.  Pilot Bore, Taper Bore L050 for twelve.7mm timing belt tooth number from 10 to a hundred and twenty
four.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel amount from 10 to a hundred and twenty
five.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt tooth quantity from ten to one hundred twenty
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth variety from 14 to fifty
seven.  Pilot Bore, Taper Bore H100 for twenty five.4mm timing belt teeth variety from 14 to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt enamel quantity from 14 to 156
nine.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt teeth variety from fourteen to 156
10.  Pilot Bore, Taper Bore H300 for seventy six.2mm timing belt tooth quantity from fourteen to 156
11.  Taper Bore XH200 for 50.8mm timing belt teeth variety from eighteen to 120
twelve.  Taper Bore XH300 for 76.2mm timing belt enamel amount from 18 to 120
13.  Taper Bore XH400 for one hundred and one.6mm timing belt teeth amount from 18 to one hundred twenty

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt teeth variety from 12 to 60 
two.   Pilot Bore T5-21 for 10mm timing belt enamel amount from ten to 60 
three.   Pilot Bore T5-27 for 16mm timing belt teeth quantity from 10 to 60 
four.   Pilot Bore T5-36 for 25mm timing belt teeth quantity from 10 to 60 
5.   Pilot Bore T10-31 for 16mm timing belt teeth amount from twelve to 60 
6.   Pilot Bore T10-40 for 25mm timing belt enamel quantity from twelve to 60 
seven.   Pilot Bore T10-47 for 32mm timing belt teeth amount from 18 to 60 
8.   Pilot Bore T10-66 for 50mm timing belt tooth number from 18 to sixty
9.  Pilot Bore AT5-21 for 10mm timing belt enamel amount from 12 to 60
10. Pilot Bore AT5-27 for 16mm timing belt tooth variety from 12 to sixty
11. Pilot Bore AT5-36 for 25mm timing belt tooth number from twelve to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt tooth number from 15 to 60 
13. Pilot Bore AT10-40 for 25mm timing belt tooth amount from fifteen to 60 
fourteen. Pilot Bore AT10-47 for 32mm timing belt enamel variety from eighteen to 60 
15. Pilot Bore AT10-66 for 50mm timing belt enamel number from 18 to 60
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-fifteen teeth amount from 10 to 72 
2.  HTD5M-09 5M-15 5M-twenty five enamel number from 12 to 72 
three.  HTD8M-twenty 8M-thirty 8M-fifty 8M-85 teeth quantity from 22 to 192 
4.  HTD14M-40 14M-55 14M-eighty five 14M-115 14M-170 teeth quantity from 28-216 
5.  Taper Bore HTD5M-fifteen 8M-twenty 8M-thirty 8M-50 8M-85 14M-40 14M-fifty five 14M-85
         14M-115 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
one.      PCGT8M-12 PCGT8M-21 PCGT8M-36 PCGT8M-62 
2.      PCGT14M-twenty PCGT14M-37 PCGT14M-68 PCGT14M-ninety PCGT14M-a hundred twenty five

Electricity Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
two. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
three. 5GT-15, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-fifteen enamel number from ten to 72 
two.   RPP5M-09 5M-15 5M-25 teeth amount from 12 to 72 
three.   RPP8M-20 8M-thirty 8M-fifty 8M-85 teeth quantity from 22 to 192 
4.   RPP14M-40 14M-55 14M-85 14M-one hundred fifteen 14M-a hundred and seventy teeth quantity from 28-216 
five.  Taper Bore RPP5M-15 8M-20 8M-thirty 8M-fifty 8M-85 14M-40 14M-55 14M-eighty five
     14M-115 14M-a hundred and seventy

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Soft Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Iron

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Soft Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Iron

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Custom Timing Belt Sprockets with Countersunk Holes     chain sprocket priceChina Custom Timing Belt Sprockets with Countersunk Holes     chain sprocket price
editor by czh 2022-12-16

Drive Sprocket

As one of the leading drive sprocket manufacturers, suppliers, and exporters of mechanical products, We offer drive sprocket and many other products.

Please contact us for details.

Manufacturer supplier exporter of the drive sprocket.

Recent Posts