China 1230 Flush Grid Modular Plastic Conveyor Belt Applicable For Small Diameter Sprocket And Knife Edge Conveying with Great quality

Guarantee: 1 Calendar year
Relevant Industries: Lodges, Garment Retailers, Building Material Stores, Manufacturing Plant, Equipment Repair Stores, Food & Beverage Manufacturing unit, Farms, Cafe, Property Use, Retail, Food Store, Printing Outlets, Development works , Strength & Mining, Foods & Beverage Retailers, Other, Advertising Firm
Customized help: OEM, ODM, OBM
Normal or Nonstandard: Normal
Sort: Conveyor belt
Materials: Plastic
Tensile Toughness: seventeen.5KN-278.9KN
Item name: 1230 Flush Grid Modular Plastic Conveyor Belt
Modular Type: 1230 Flush Grid
Normal Width(mm): N
Non-common Width: 50*N N Be aware:n will increase as integer ultiplication:because of to different content shrinkage,real will be lower than standard width Non-normal Width 50*N+sixteen.66*n Pitch(mm) Belt Materials PP/POM Pin Content PP/PA/PA6 Pin Diameter 5mm Function Load POM:11000 PP:7000 Temperature PP:+1℃ to 90℃ POM:-30℃ to 90℃ Open Spot 18% Belt Fat(kg/㎡) 7.9Belt Weight(kg/㎡)6.eight 1230 Injection Sprockets

Injection Sprockets ToothPitch DiameterOutside DiameterBore Size Accessible on Ask for By Machined
1/3-1271-10T1041.21.6241.81.6420 twenty five
1/3-1271-15T1562.four2.forty five62.92.4720 25
1/3-1271-19T1978.eight3.1079.three3.1220 twenty five
Application Industries 1.Food2.Beverage3.Pharmaceuticals4.Postal service5.Other industries Gain 1.Robust corrosion resistance, 2.Substantial tensile power, Keyless shaft-hub locking system Factory Value safe locking assembly Coupling Producer electricity transmission Higher Good quality 3.Good stability, 4.Heat resistance and deformation, 5.Low noise, 6.Large temperature resistance, 7.Prolonged support lifestyle Actual physical and chemical homes Polyoxymethylene (POM), also identified as acetal polyacetal, and polyformaldehyde,It is an engineering thermoplastic employed in precision parts requiring high stiffness, reduced friction and exceptional dimensional steadiness. As with a lot of other synthetic polymers, it is created by distinct chemical firms with marginally different formulas and bought variously by such names as Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac and Hostaform. POM is characterized by its substantial power, hardness and rigidity to −40 °C. POM is intrinsically opaque white due to the fact of its high crystalline composition but can be developed in a variety of colors.POM has a density of 1.410–1.420 g/cm3.Polypropylene (PP), Manufacturing facility Price tag Setscrew sort Parallel Coupling High Torque Power Transmission precision shaft connector servomotor also acknowledged as polypropene, It is a thermoplastic polymer used in a vast selection of programs. It isproduced through chain-development polymerization from the monomer propylene.Polypropylene belongs to the team of polyolefins and is partly crystalline and non-polar. Its properties are equivalent to polyethylene, but it is a bit more challenging and far more heat-resistant. It is a white, mechanically rugged content and has a highchemical resistance. Nylon 6(PA6) or polycaprolactam is a polymer, in certain semicrystalline polyamide. Not like most other nylons, nylon 6 is not a condensation polymer, but rather is shaped by ring-opening polymerization this makes it a special scenario in the comparison amongst condensation and addition polymers. ABOUT US What we doWith seventeen a long time of production and R&D knowledge in the conveyor industry, We have 10 R&D groups and almost five hundred existing molds established.We provide more than forty,000 clients around the globe. Our company has 15 sets of products injection molding devices, holds much more than 20 patents and is applying for a lot more 5 processing facilities, 10 experienced product sales groups and 8 soon after-revenue providers.Our mission is to produce benefit for all of our customers close to the globe. To achieve a CZPT end result through large quality products and consumer support frame of mind.We find to provide profitable options to our customers’ needs and problems. We are truthful in our dealings with customers, We repeatedly improve our practices and processes, delivering solutions to improve effectiveness for the client. Historical past of the firm exhibition Cooperative company FAQ Q: Are you investing business or producer ?A: We are manufacturer.Q: How lengthy is your delivery time?A: Normally it is 2-3 times in accordance to quantity and dimension.Q: Can you style according to our need?A: Sure, We can manufacture in accordance to your specialized drawing. Or we candesign in accordance to your necessity. Q:What is the payment phrases of your company?A: T/T, Western Union, Cash Gram, PayPal, Union Pay out.


How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.


One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China 1230 Flush Grid Modular Plastic Conveyor Belt Applicable For Small Diameter Sprocket And Knife Edge Conveying     with Great quality China 1230 Flush Grid Modular Plastic Conveyor Belt Applicable For Small Diameter Sprocket And Knife Edge Conveying     with Great quality
editor by CX 2023-04-24

Drive Sprocket

As one of the leading drive sprocket manufacturers, suppliers, and exporters of mechanical products, We offer drive sprocket and many other products.

Please contact us for details.

Manufacturer supplier exporter of the drive sprocket.

Recent Posts